Philips SOPHO 2000 IPS User Manual page 314

SWITCH NAME
SW1 (Dip SW)
ON
1 2 3 4 5 6 7 8
The figure in the SWITCH NAME column and the position of
umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and
, the setting of the switch varies with the system concerned.
NOTE 1: Set the groove on the switch to the desired position.
NOTE 2: When the power is on, flip the MB switch to ON (UP position) before plugging/unplugging the
circuit card.
SWITCH SETTING
NUMBER POSITION
1
OFF
2
OFF
3
OFF
4
OFF
5
OFF
6
OFF
7
OFF
8
OFF
FUNCTION
Always set to OFF
Always set to OFF
Always set to OFF
Always set to OFF
Always set to OFF
Always set to OFF
Always set to OFF
Always set to OFF
– 300 –
PN-SC01 (DCH)
in the SETTING POSITION col-
NWA-008852-001 Rev.5.0
CHECK
98ch4002.fm