Bri Trunk Programming - Philips SOPHO 2000 IPS User Manual

BRI Trunk Programming

START
CM05 Assign an AP number to the BRT card.
The AP number must match the SENS switch
setting on the BRT card.
NOTE:
Specify the AP highway channel for PN-
4BRTA-A card.
Assign an Remote Site number that accommo-
dates AP cards to the AP number assigned by
CM05 Y=0.
Assign the accommodation type of the Remote
Site to the AP number assigned by CM05 Y=0.
NOTE:
A
DESCRIPTION
The AP number 20-31 cannot be set
to the PN-BRTA card.
Only when accommodating the BRT
card in Remote Site, set the second
data to 1 (remote site) to the AP
number assigned by CM05 Y=0.
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=0
(1) 04-15, 20-31: AP No.
(2) 10: BRT card
INITIAL
• Y=1
(1) 04-15, 20-31: AP No.
(2) 0 : Use Expanded Highway channel
INITIAL
1 : Use Basic Highway channel
• Y=8
(1) 04-15, 20-31: AP No.
(2) XX 99
XX: 01-15: Remote Site No. 01-15
INITIAL
• Y=6
(1) 04-15, 20-31: AP No.
(2) 1 : Remote Site
INITIAL
3 : AP card
– 186 –
EVENT BASED CCIS PROGRAMMING
DATA
(128 time slots)
(128 time slots)
[Series 3200 R6.2 software or
Series 3300 software required]
01-30: Remote Site No. 01-30
[Series 3400 software required]
NONE : No data
NWA-008852-001 Rev.5.0
NOVEMBER/15/2006
98ch3002.fm