Ich; Ilc - Philips SOPHO 2000 IPS User Manual

ICH

The ISDN Channel Handler (ICH) provides the D channel signaling interface and controls an ILC (Layer
2 and 3).

ILC

The ISDN Line Circuit (ILC) provides a physical interfaces to the ISDN Terminal. The interface provides
for a maximum of 2 line circuit.
In the station to station call, the Calling Party Number sent to the ISDN Terminal is as follows.
[Series 3700 R12.2 software required]
• When calling from Single Line Telephone/D
By setting CM08>584, you can select Station Number or Calling Party Number (set by CM12
Y=12/13) to send to the ISDN Terminal as follows.
SUPPORT SOFTWARE
VERSION
Series 3700 R12.2 software or later
Series 3700 R12.1 software or before
• When calling from ISDN Terminal
Calling Party Number is sent to the terminated ISDN Terminal, when the originated ISDN
Terminal sends Calling Party Number (set by the ISDN Terminal or CM12 Y=12/13).
Station Number of the originated ISDN Terminal is sent to the terminated ISDN Terminal, when
the originated ISDN Terminal doesn't send Calling Party Number.
CHAPTER 1 GENERAL INFORMATION
term
CM08>584
1 Station Number is sent.
0 Calling Party Number assigned by
CM12 Y=12/13 is sent.
Not available Calling Party Number assigned by
CM12 Y=12/13 is sent.
– 20 –
SYSTEM OUTLINE
SENT NUMBER
NWA-008852-001 Rev.5.0
NOVEMBER/15/2006
98ch1001.fm