Philips SOPHO 2000 IPS User Manual page 61

• WHEN MAKING A SWITCH SETTING ON A CIRCUIT CARD
CIRCUIT
CARD
• WHEN CARRYING A CIRCUIT CARD
CIRCUIT
CARD
The mark shown below is attached to the sheet for the work in which circuit cards are handled. When en-
gaging in such work, the installer must be careful not to cause damage by static electricity.
Static Electricity Guard
WEAR A WRIST STRAP AND PERFORM
THE WORK ON A GROUNDED
CONDUCTIVE WORK SURFACE.
CONDUCTIVE
POLYETHYLENE
BAG
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
– 47 –
CHAPTER 2 INSTALLATION
PRECAUTIONS
WHEN CARRYING A CIRCUIT
CARD AROUND, KEEP THE
CARD IN A CONDUCTIVE
POLYETHYLENE BAG.
NWA-008852-001 Rev.5.0
98ch2001.fm