Siemens SINUMERIK 828D Operating Manual page 139

Skip levels, activate
Check the corresponding checkbox in order to skip the required block level.
Note
The "Program control - skip blocks" window is only available when more than one skip level
is set up.
Proceed as follows
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
1. Select the "Machine" operating area.
2. Press the <AUTO> or <MDA> key.
3 Press the "Prog. cntrl." and "Skip blocks" softkeys.
The "Program control" window appears and shows a list of block
levels.
Machining the workpiece
4.8 Intervening in the program sequence
139