User variables
9.2 R parameters
9.2
R parameters
R parameters (arithmetic parameters) are channel-specific variables that you can use within
a G code program. G code programs can read and write R parameters.
These values are retained after the control is switched off.
Number of channel-specific R parameters
The number of channel-specific R parameters is defined in a machine data element.
Range: R0-R999 (dependent on machine data).
There are no gaps in the numbering within the range.
Proceed as follows
332
Machine manufacturer
Please also refer to the machine manufacturer's instructions.
1.
Select the "Parameter" operating area.
2.
Press the "User variable" softkey.
3.
Press the "R variables" softkey.
The "R parameters" window appears.
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
HMI sl Milling