Inserting/Deleting A Symbol Table; Searching For Operands - Siemens SINUMERIK 828D Operating Manual

Ladder add-on tool

19.15 Inserting/deleting a symbol table

19.15 Inserting/deleting a symbol table
New user symbol tables can be generated and changed. Tables that are no longer used can
be deleted.
Note
Delete symbol table
The "Delete" softkey is only available if a user symbol table has been selected.
Procedure
19.16

Searching for operands

You can use the search function to quickly reach points in very large programs where you
would like, for example, to make changes.
Restricting the search
● "Window 1" / "Window 2"
● "Window 1" / "Window 2","Symbol table"
● "Cross references"
462
1. The symbol table is opened.
2. Press the "Select sym. table" softkey.
The "Symbol Table - Selection" window appears.
3. Position the cursor at the desired position and press the "Insert sym.
table" softkey.
The "Create Symbol Table" window appears.
4 Enter a symbolic name and press the "OK" softkey.
The new user symbol table is inserted in the line after the cursor
position.
- OR -
Select a symbol table and press the "Change symbol table" softkey if
you wish to change the properties of the symbol table.
5. Position the cursor on the symbol table that you want to delete and
press the "Delete" softkey.
With "Find subroutine command", you can find ???
With "Go to", you can jump directly to the desired network.
With "Go to", you can jump directly to the desired line.
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
HMI sl Milling