Creating A New Block - Siemens SINUMERIK 828D Operating Manual

Ladder add-on tool

19.10 Creating a new block

Procedure
...
19.10 Creating a new block
If INT blocks are missing, you can add these.
Name
Author
Number of the
interrupt program
Data class
Comment
456
1. The ladder diagram display (LAD) is opened.
2. Press the "Program block" softkey.
3. Press the "Local variables" softkey.
The "Local Variables" window appears and lists the created variables.
4. Press the "Edit" softkey.
The fields can be edited.
5. Enter a name, select the variable and data type and, if required, enter
a comment.
6. Press the "Attach line" softkey if you want to add a further variable and
enter the data.
- OR -
Select the relevant variable and press the "Delete line" softkey to
remove the variable from the list.
INT _100, INT_101
The number from the selection field "Number, interrupt program" is
taken for the name of the INT block.
A maximum of 48 characters is permitted.
100
101
Individual
A maximum of 100 lines and 4096 characters are permitted.
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
HMI sl Milling