Changing And Adapting A Simulation Graphic; Enlarging Or Reducing The Graphical Representation; Panning A Graphical Representation - Siemens SINUMERIK 828D Operating Manual
Hmi sl milling
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Operating manual (926 pages)
Table of Contents
Advertisement
Simulating machining
5.8 Changing and adapting a simulation graphic
5.8
Changing and adapting a simulation graphic
5.8.1
Enlarging or reducing the graphical representation
Requirement
The simulation or the simultaneous recording is started.
Procedure
Note
Selected section
As long as a program is being run-in, the selected sections and adapted sizes are kept.
5.8.2
Panning a graphical representation
Requirement
The simulation or the simultaneous recording is started.
164
1.
Press the <+> and <-> keys if you want to enlarge or reduce the
graphical representation now displayed.
The graphical representation is enlarged or reduced from the center.
- OR -
Press the "Details" and "Zoom +" softkeys if you want to increase the
size of the segment.
- OR -
Press the "Details" and "Zoom -" softkeys if you want to decrease the
size of the segment.
- OR -
Press the "Details" and "Auto zoom" softkeys if you want to
automatically adapt the segment to the size of the window.
The automatic scaling function "Fit to size" takes account of the
largest expansion of the workpiece in the individual axes.
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
HMI sl Milling
Advertisement
Table of Contents
