Channel Switchover - Siemens SINUMERIK 828D Operating Manual

Setting up the machine
2.3 Operating modes
Select "AUTO"
"TEACH IN" submode
The "TEACH IN" submode is available in the "AUTO" and "MDA" modes.
There you may create, edit and execute part programs (main programs or subroutines) for
motional sequences or simple workpieces by approaching and saving positions.
Selecting "Teach In"
2.3.2

Channel switchover

It is possible to switch between channels when several are in use. Since individual channels
may be assigned to different mode groups, a channel switchover command is also an implicit
mode switchover command.
Changing the channel
Channel switchover via touch operation
On the HT 8 and when using a touch screen operating panel, you can switch to the next
channel via touch operation in the status display.
52
Press the <AUTO> key.
Press the <TEACH IN> key.
Press the <CHANNEL> key.
The channel changes over to the next channel or a channel menu
appears.
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
HMI sl Milling