Generating A G Code Program - Siemens SINUMERIK 828D Operating Manual
Hmi sl milling
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Operating manual (926 pages)
Table of Contents
Advertisement
6.5
Generating a G code program
Create a separate program for each new workpiece that you would like to produce. The
program contains the individual machining steps that must be performed to produce the
workpiece.
Part programs in the G code can be created in a new workpiece or under "Part programs".
Procedure
Creating a G code program
See also
Changing a cycle call (Page 183)
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
1.
Select the "Program manager" operating area.
2.
Select the desired storage location and position the cursor on the
workpiece folder, in which you would like to store the program.
3.
Press the "New" and "Workpiece" softkeys.
The "New Workpiece" window appears.
4.
Enter the desired workpiece name, select a template, if necessary,
and press the "OK" softkey.
The name can contain up to 28 characters (name + dot + 3-character
extension). You can use all letters (except accented characters), digits
and underscores (_). The directory type (WPD) is set by default.
A new folder with the name of the workpiece is created and the "New
G code program" window opens.
5.
Select the file type (MPF or SPF), enter the desired name of the
program and press the "OK" softkey or the "Input" key.
This editor is opened.
6.
Enter the desired G code commands.
Creating G code program
6.5 Generating a G code program
175
Advertisement
Table of Contents
