Siemens SINUMERIK 828D Operating Manual page 195
Hmi sl milling
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Operating manual (926 pages)
Table of Contents
Advertisement
Filling-out the program header
See also
Changing program settings (Page 204)
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
4.
Enter the desired workpiece name and press the "OK" softkey.
The name may be a maximum of 24 characters in length. You can use
all letters (except accented characters), digits and underscores (_).
A new folder with the name of the workpiece is created and the "New
G Code Program" window opens.
5.
Press the "ShopMill" softkey.
The "New step sequence program" window is displayed. The
"ShopMill" type is selected.
You have the option of changing the name of the machining step
program.
6.
Press the "OK" softkey or the <Input> key.
The editor is opened and the "Program header" window is displayed.
7.
Select a work offset and enter the dimensions of the blank and the
parameters, which are effective over the complete program, e.g.
dimension units in mm or inch, tool axis, retraction plane, safety
clearance and machining direction.
8.
Press the "Accept" softkey.
The work plan is displayed. Program header and end of program are
created as program blocks.
The end of program is automatically defined.
Creating a ShopMill program
7.4 Creating a ShopMill program
195
Advertisement
Table of Contents
