Creating A New Shopmill Program; Storing Any New File - Siemens SINUMERIK 828D Operating Manual
Hmi sl milling
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Operating manual (926 pages)
Table of Contents
Advertisement
Program management
12.4 Creating a directory/program/job list/program list
12.4.4
Creating a new ShopMill program
In the part program and workpiece directories, you can create ShopMill programs and then
subsequently generate the machining steps for them.
Procedure
12.4.5
Storing any new file
In each directory or subdirectory you can create a file in any format that you specify.
This does not apply to the NC memory. Here you can create the following file types under a
workpiece using the "Any" softkey.
396
1.
Select the "Program Manager" operating area.
2.
Select the desired storage location and position the cursor on the
folder, in which you would like to store the program.
3.
Press the "New" softkey.
4.
Press the "ShopMill" softkey.
The "New step sequence program" window opens.
The "ShopMill" type is specified.
5.
Enter the desired program name and press the "OK" softkey.
Program names may be a maximum of 24 characters in length.
You can use all letters (except accented characters), digits and
underscores (_).
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
HMI sl Milling
Advertisement
Table of Contents
