Siemens SINUMERIK 828D Operating Manual page 322

Programming technological functions (cycles)
8.5 Further cycles and functions ShopMill
Procedure
Parameter
T
D
S / V
DR
322
1. The ShopMill program to be edited has been created and you are in
the editor.
2. Press the menu forward key and the "Straight Circle" softkey.
3. Press the "Tool" softkey.
Enter a tool in parameter field "T".
- OR -
Press the "Select tool" softkey if you want to select a tool from the tool
list, position the cursor on the tool that you wish to use for the
machining operation and press the "To Program" softkey.
The tool is copied into the "T" parameter field.
4. Select the tool cutting edge number D if the tool has several cutting
edges.
5. Enter the spindle speed or cutting rate.
6. Enter an allowance in the "DR" field.
Press the "Accept" softkey.
The values are saved and the parameterization screen form is closed.
The work plan is displayed and the newly created program block is
marked.
Description
Tool name
Cutting edge number
Spindle speed or
Constant cutting rate
Allowance, tool radius
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
Unit
rev/min
m/min
mm
HMI sl Milling