Alarms, error messages, and system alarms
20.3 Displaying messages
20.3
Displaying messages
PLC and part program messages may be issued during machining.
These message will not interrupt the program execution. Messages provide information with
regard to a certain behavior of the cycles and with regard to the progress of machining and
are usually kept beyond a machining step or until the end of the cycle.
Overview of messages
You can display all issued messages.
The message overview contains the following information:
● Date
● Message number
● Message text
Proceed as follows
See also
Sorting, alarms, faults and messages (Page 471)
470
is only displayed for PLC messages
1.
Select the "Diagnosis" operating area.
2.
Press the "Messages" softkey.
The "Messages" window appears.
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
HMI sl Milling