Displaying And Editing Settable Zero Offset; Displaying And Editing Details Of The Zero Offsets - Siemens SINUMERIK 828D Operating Manual
Hmi sl milling
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Operating manual (926 pages)
Table of Contents
Advertisement
2.7.4
Displaying and editing settable zero offset
All settable offsets, divided into coarse and fine offsets, are displayed in the "Work Offset -
G54..G599" window.
The currently active work offsets are displayed on a green background.
Rotation, scaling and mirroring are displayed.
Procedure
Note
Activate settable work offsets
The settable work offsets must first be selected in the program before they have an impact.
2.7.5
Displaying and editing details of the zero offsets
For each work offset, you can display and edit all data for all axes. You can also delete work
offsets.
For every axis, values for the following data will be displayed:
● Coarse and fine offsets
● Rotation
● Scaling
● Mirroring
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
1.
Select the "Parameter" operating area.
2.
Press the "Work offset" softkey.
3.
Press the "G54...G599" softkey.
The "Work Offset - G54..G599" window is opened.
Note
The softkey display is "dynamic" i.e. the display orientates itself to the
number of set work offsets.
4.
You can edit the values directly in the table.
Setting up the machine
2.7 Work offsets
93
Advertisement
Table of Contents
