Procedure
Parameters, G code program
PRG
Name of the program to be generated
PL
Machining plane
Milling direction
•
•
RP
Retraction plane
SC
Safety clearance
F
Feedrate
Parameter
Description
TR
Reference tool for residual material
D
Cutting edge number
Z0
Reference point Z
Z1
Pocket depth (abs) or depth referred to Z0 (inc)
Maximum plane infeed
DXY
•
Maximum plane infeed as a percentage of the milling cutter diameter
•
DZ
Maximum depth infeed
Lift mode
Lift mode before new infeed
If the machining operation requires several points of insertion, the retraction height can
be programmed:
To retraction plane
•
Z0 + safety clearance
•
When making the transition to the next insertion point, the tool returns to this height. If
there are no elements larger than Z0 in the pocket area, "Z0 + safety clearance" can be
selected as the lift mode.
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
1.
The part program or ShopMill program to be processed has been
created and you are in the editor.
2.
Press the "Contour milling" and "Spigot Res. Mat." softkeys.
The "Spigot Res. Mat." input window opens.
3.
For the ShopMill program, press the "All parameters" softkey if you
want to enter additional parameters.
Climbing
Conventional
mm
mm
mm/min
Programming technological functions (cycles)
Parameters, ShopMill program
T
Tool name
F
Feedrate
S / V
Spindle speed or constant
cutting rate
8.3 Contour milling
mm/min
mm/rev
rpm
m/min
Unit
mm
mm
mm
%
mm
mm
mm
301