2.7.6
Deleting a work offset
You have the option of deleting zero offsets. This resets the entered values.
Proceed as follows
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Press the "Back" softkey to close the window.
1.
Select the "Parameter" operating area.
2.
Press the "Work offset" softkey.
3.
Press the "Active", "Base" or "G54...G599" softkey.
4.
Press the "Details" softkey.
5.
Position the cursor on the zero offset you would like to delete.
6.
Press the "Clear Offset" soft key.
Setting up the machine
2.7 Work offsets
95