Siemens SINUMERIK 828D Operating Manual page 297

4. Stock removal
5. Contour pocket 1
6. Remove residual material
7. Contour pocket 2
8. Remove residual material
Procedure
Parameters, G code program
PRG Name of the program to be generated
PL Machining plane
Milling direction •
•
RP Retraction plane
SC Safety clearance
F Feedrate
Parameter Description
Machining The following machining operations can be selected:
∇ (roughing)
TR Reference tool for residual material
D Cutting edge number
Z0 Reference point
Z1 Pocket depth (abs) or depth referred to Z0 (inc)
Maximum plane infeed
DXY •
Maximum plane infeed as a percentage of the milling cutter diameter
•
DZ Maximum depth infeed
UXY Finishing allowance, plane
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
1. The part program or ShopMill program to be processed has been
created and you are in the editor.
2. Press the "Contour milling" and "Pocket Res. Mat." softkeys.
The "Pocket Res. Mat." input window opens.
3. For the ShopMill program, press the "All parameters" softkey if you
want to enter additional parameters.
Climbing
Conventional
mm
mm
mm/min
Programming technological functions (cycles)
Parameters, ShopMill program
T Tool name
F Feedrate
S / V Spindle speed or constant
cutting rate
8.3 Contour milling
mm/min
mm/rev
rpm
m/min
Unit
mm
mm
mm
%
mm
mm
297