Deleting A Block - Siemens SINUMERIK 828D Operating Manual

Teaching in a program

10.7 Deleting a block

10.7 Deleting a block
You have the option of deleting a program block entirely.
Requirement
"AUTO" mode: The program to be processed is selected.
Proceed as follows
In the "Settings" window, you define which axes are to be included in the teach-in block and
whether motion-type and continuous-path mode parameters are to be provided.
350
1. Select the "Machine" operating area.
2. Press the <AUTO> or <MDA> key.
3. Press the <TEACH IN> key.
4. Press the "Teach prog." softkey.
5. Click the program block to be deleted.
6. Press the ">>" and "Delete block" softkeys.
The program block on which the cursor is positioned is deleted.
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
HMI sl Milling