Changing A Cycle Call - Siemens SINUMERIK 828D Operating Manual

● The input field has a colored background (background color, orange).
● A note is displayed in the comment line.
● If the parameter input field is selected using the cursor, the not is also displayed as
The programming can only be completed after the incorrect value has been corrected.
Faulty parameter values are also monitored with alarms during the cycle runtime.
6.9.4

Changing a cycle call

You have called the desired cycle via softkey in the program editor, entered the parameters
and confirmed with "Accept".
The cycle is transferred to the editor as G code. The cycle parameterized in G code has a
light gray background and is write-protected.
Procedure
See also
Generating a G code program (Page 175)
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
tooltip.
1. Select the desired cycle call and press the <Cursor right> key.
The associated input screen of the selected cycle call is opened.
- OR -
Press the <SHIFT + INSERT> key combination.
This starts the edit mode for this cycle call and you can edit it like a
normal NC block. In this way, it is possible to create an empty block
before the cycle call.
Note: In edit mode, the cycle call can be changed in such a way that it
can no longer be recompiled in the parameter screen.
You exit the edit mode by pressing the <SHIFT + INSERT> key
combination.
- OR -
You are in the edit mode and press the <INPUT> key.
A new line is inserted before the selected cycle call.
Creating G code program
6.9 Calling technology functions
183