Setting up the machine
2.7 Work offsets
2.7.3
Displaying and editing base zero offset
The defined channel-specific and global base offsets, divided into coarse and fine offsets,
are displayed for all set-up axes in the "Work offset - Base" window.
Procedure
Note
Activate base offsets
The offsets specified here are immediately active.
92
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1.
Select the "Parameter" operating area.
2.
Press the "Work offset" softkey.
3.
Press the "Base" softkey.
The "Work offset - Base" window is opened.
4.
You can edit the values directly in the table.
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
HMI sl Milling