Hour Meter Reset Menu (M36) - Sony BVW-55 Maintenance Manual

3-4-4. HOUR METER RESET Menu (M36)

This menu can display and reset the values of the resettable
hours meter and thread counter.
M3:OTHERS
M36:HOUR METER RESET
*
DRUM HOURS 1234
TAPE HOURS 123
THREAD COUNTER 2345
Description of LCD monitor
DRUM HOURS: Indicates the total of drum
rotation time. Same as in setup
menu ITEM-H12.
TAPE HOURS: Indicates the total of tape trans-
port time. Same as in setup menu
ITEM-H13.
THREAD COUNTER: Indicates the total of threading
count. Same as in setup menu
ITEM-H14.
Menu operation
Turn the JOG dial to move the * mark.
The contents of the *-marked line on the LCD monitor are
displayed in a sub LCD.
To reset
The former state cannot be returned when the SET button
is pressed for reset operation.
(1) Turn the JOG dial and move the * mark to the item to
be reset.
(2) Turn the JOG dial in REVERSE (3) direction while
pressing the search button. = The display value then
becomes zero ("0").
. Message "Push SET Button" is displayed on only
the LCD monitor when the display value is set to
"0".
. To return to the former state, turn the JOG dial in
FORWARD (2) direction.
(3) If there are other items to be reset, repeat steps (1) and
(2).
(4) Press the SET button to save the reset data.
. Message "Saving ..." is displayed on only the LCD
monitor. If no abnormality is found, the display
changes to "Save Complete" after a few seconds.
To turn off "Save Complete", turn the JOG dial.
BVW-55
3-4. OTHERS CHECK Mode (M3)
3-4-4. HOUR METER RESET Menu (M36)
3-31