Sony BVW-55 Maintenance Manual page 199

Description of LCD monitor
AUDIO/VIDEO ADJUST MODE
A231:SDI ENC VCO
1
*
Manual
2
SDI ENC VCO
3
VCO STATUS 1
Ex. A231 : SDI ENC VCO
1 The adjustment mode (manual and automatic) or the
messages during automatic adjustment are displayed in
this line.
Manual :
Auto (Push SET Button) : Press the SET button to
Auto Adjusting ... :
Auto adjust Complete :
Auto Adjust Failure :
n
The adjustment data can be manually changed even if
message "Auto (Push SET Button)" is displayed.
2 The adjustment item and adjustment data value are
displayed in this line.
3 The VCO status is displayed as "0" or "1".
Change of adjustment mode
The relation between the adjustment mode and display is
shown in the table below.
Adj. mode LCD monitor
Manual adjustment Manual
Automatically adjustable Auto (Push SET Button)
(i) Turn the JOG dial in REVERSE (3) direction and
move the * mark to line 1 on the LCD monitor. (In a
sub LCD, "MANUAL" or "PUSH SET" is displayed.)
(ii) Turn the JOG dial while pressing the Search button.
Manual 8 Automatic: [Search] + DIAL (2)
Manual 7 Automatic: [Search] + DIAL (3)
BVW-55 P2
5D
Adjustment mode is set to
the manual adjustment.
initiate the automatic
adjustment.
Automatic adjustment is in
progress.
Automatic adjustment is
completed.
Automatic adjustment fails.
Sub LCD
MANUAL
PUSH SET
2-2. TAPE Maintenance Mode (M0)
2-2-4. AUDIO/VIDEO ADJUST Mode (A2)
2-23