Oil And Grease - Sony BVW-55 Maintenance Manual

3-1. General Information on Parts Replacement and Alignment

3-1-4. Oil and Grease

Be sure to use the specified oil and grease.
If not, a serious failure may occur in the unit because of difference in viscosity and components.
Do not use oil or grease in which dust is mixed. This may also cause a serious failure.
The oil and grease used in this model are as follows:
Oil:
Grease (SGL-601):
Grease (SGL-801):
Grease (PG-662):
. Oil of one drop indicates the amount at the tip of a stick with diameter of 2 mm shown in the figure.
Oil of a quarter of one drop indicates the amount at the tip of a stick with diameter 0.3 mm shown in the
figure. Applying oil described in this manual means this a quarter drop of oil applying.
. Apply grease on the surface of the part like a thin film. If grease smeared apart from the relevant areas,
be sure to wipe using a gauze or soft cloth.
. Apart from the relevant areas never use oil and grease.
<One drop of oil>
Dip into oil
Oil (5 mm in depth)
<A quarter of one drop>
Dip into oil
Oil (5 mm in depth)
3-6
7-661-018-18
7-651-000-10
7-651-000-11
7-651-000-59
Stick (2 mm dia.) Pulling up
vertically
Stick (0.3 mm dia.) Pulling up
vertically
One drop
A quarter of one drop
BVW-55 P2