Sony BVW-55 Maintenance Manual page 196

2-2. TAPE Maintenance Mode (M0)
2-2-3. BETACAM REC ADJUST Mode (A1)
A1F : NV-RAM CONTROL
The A1F : NV-RAM CONTROL menu is used to save the
recording system adjustment data adjusted in the BETA-
CAM REC ADJUST mode in NV-RAM.
The current adjustment data can return to the former state
when "ALL DATA PREVIOUS" is selected before the
adjustment data is saved in NV-RAM.
m
. Do not save the adjustment data in NV-RAM when
abnormality is found during automatic adjustment (when
message "Auto Adjust Failure" or "Condition NG" is
displayed).
. When the adjustment data was not stored in this menu, it
returns to the state before adjustment if the power is
turned off.
To execute the menu
(1) Turn the JOG dial and move the * mark on the LCD
monitor as described below.
To save the adjustment data after adjustment:
8 "SAVE ALL ADJUST DATA"
To return to the adjustment data before adjustment
8 "ALL DATA PREVIOUS"
. In a sub LCD, "SAVE ALL ADJUST DATA" and
"ALL DATA PREVIOUS" are displayed as
messages "SAVE ALL ADJUST" and "ALL
DATA PREVIOUS", respectively.
(2) Press the SET button.
. The data transmission is initiated when the SET
button is pressed.
. Message "Saving ..." or "Loading ..." is displayed
on the LCD monitor, and message
"SAVING" or "LOADING" is displayed in the sub
LCD.
(3) Confirm that the data transmission is completed.
. After data transmission is completed, message
"Save Complete" or "Load Complete" is displayed
on the LCD monitor, and message "SAVE COM-
PLETE" or "LOAD COMPLETE" is displayed in
the sub LCD.
(4) Press the MENU button to terminate the menu.
2-20
Example of display and operation
(In data save)
LCD monitor
A1F:NV-RAM CONTROL
*
NO OPERATION
SAVE ALL ADJUST DATA
ALL DATA PREVIOUS
(1) 0 DIAL (2)
A1F:NV-RAM CONTROL
NO OPERATION
*
SAVE ALL ADJUST DATA
ALL DATA PREVIOU
(2) 0 [SET]
A1F:NV-RAM CONTROL
Saving ..
0
A1F:NV-RAM CONTROL
Save Complete
(3)
0 Confirm
[MENU]
(4)
0
Sub LCD
NO OPERA TION
SAVE ALL ADJUST
SAVING
SAVE CO MPLETE
BVW-55 P2