Sony BVW-55 Maintenance Manual page 202

2-2. TAPE Maintenance Mode (M0)
2-2-4. AUDIO/VIDEO ADJUST Mode (A2)
Change of adjustment mode
The relation between the adjustment mode and display is
shown in the table below.
Adj. mode LCD monitor
Manual adjustment Manual
Automatically adjustable Auto (Push SET Button) PUSH SET
(i) Turn the JOG dial in REVERSE (3) direction and
move the * mark to line 1 on the LCD monitor. (In a
sub LCD, "MANUAL" or "PUSH SET" is displayed.)
(ii) Turn the JOG dial while pressing the search button.
Manual 8 Automatic: [Search] + DIAL (2)
Manual 7 Automatic: [Search] + DIAL (3)
To execute the automatic adjustment
(1) Display "Auto (Push SET Button)" on the LCD
monitor and "PUSH SET" in the sub LCD referring to
the "Change of adjustment mode" described above.
(2) The automatic adjustment is executed when the SET
button is pressed.
. The display on the LCD monitor changes to "Auto
Adjusting...". The displayed data value also
changes.
The display in the sub LCD does not change.
(3) Confirm the automatic adjustment completion and
each status on the LCD monitor.
. Message "Auto Adjust Complete" is displayed
when the automatic adjustment is completed.
Status for SCH and SFTZ are displayed as "1".
For SFTP is displayed in alternate "0" and "1".
n
If the preparation for adjustment is not proper, mes-
sage "Auto Adjust Failure" is displayed.
(4) To terminate the menu, press the MENU button.
To execute the automatic adjustment again in this
menu, return to step (2).
(5) To save the adjustment data in NV-RAM, execute
SAVE ALL ADJUST DATA in an A2F : NV-RAM
CONTROL menu.
To return the adjustment data to the state before
adjustment, execute ALL DATA PREVIOUS in an
A2F : NV-RAM CONTROL menu.
Caution during manual adjustment
Confirm the adjustment data range in which the SCH status
is set to "1" and set the adjustment data to the intermediate
value when performing the manual adjustment.
n
For the manual adjustment, refer to the "To change the
adjustment data manually" on page 2-21.
2-26
Example of display and operation
LCD monitor
AUDIO/VIDEO ADJUST MODE
A24:INPUT CF DETECT
Sub LCD
*
Manual
INPUT CF DETECT
MANUAL
SCH
SFTZ
SFTP
(1) 0 [Search] + DIAL(2)
AUDIO/VIDEO ADJUST MODE
A24:INPUT CF DETECT
* Auto (Push SET button)
INPUT CF DETECT
SCH
SFTZ
SFTP
(2) 0 [SET]
AUDIO/VIDEO ADJUST MODE
A24:INPUT CF DETECT
*
Auto Adjusting ...
INPUT CF DETECT
SCH
SFTZ
SFTP
(omitted)
AUDIO/VIDEO ADJUST MODE
A24:INPUT CF DETECT
*
Auto Adjust Complete
INPUT CF DETECT
SCH
SFTZ
SFTP
(3)
(4)
(5)
* A2F:NV-RAM CONTROL
Sub LCD
MANUAL
9E
0
0
0
PUSH SET
9E
0
0
0
PUSH SET
00
0
0
0
0
0
PUSH SET
85
1
1
1
Confirm
0
[MENU]
0
[MENU]
0
Data save
0
BVW-55 P2