Cbc10 Communication Board For Can Bus (Sinamics S120) - Siemens SINAMICS S120 Commissioning Manual

Prerequisites for commissioning

2.2 CBC10 Communication Board for CAN Bus (SINAMICS S120)

2.2 CBC10 Communication Board for CAN Bus (SINAMICS S120)
Introduction
The CBC10 CANopen communication board (CAN communication board) is used to connect
drives in the SINAMICS S120 drive system to higher-level automation systems with a CAN
bus.
Figure 2-1 View of the CBC10 Option Board
The CANopen Option Board uses two 9-pin Sub D connectors for the connection to the CAN
bus system.
The connectors can be used as inputs or outputs. Unused pins are plated through.
The following baud rates (among others) are supported: 10, 20, 50, 125, 250, 500, 800
kBaud, and 1 MBaud.
58
Commissioning Manual, (IH2), V2.6, 10/2008 Edition, 6SL3097-2AA00-0BP3
CANopen interface