Entering Parameter Values In The Expert List - Siemens SINAMICS S120 Commissioning Manual

Prerequisites for commissioning
2.4 STARTER commissioning tool
4. Double-click r8860: Bit1.
5. In the graphical screen interface, you can now see that p1155 has been interconnected
See also
BICO interconnection in conjunction with CANopen (Page 43)
Interconnecting process data in the receive and transmit buffers (Page 108)
2.4.3

Entering parameter values in the expert list

Introduction
Note
Parameters can be entered and displayed in the expert list as decimal or hexadecimal
values.
Example
If you want to process decimal values as hexadecimal or binary values, use the calculator on
your PC and carry out the following:
1. Copy the decimal value in the expert list to your calculator.
2. Display this decimal value on your calculator as either a hexadecimal or binary value.
3. Change the value.
4. Use your calculator to convert the value back to a decimal value.
5. Copy this decimal value to the expert list.
72
Figure 2-15 Interconnection via graphical screen interface 5
with r parameter r8860[1].
Commissioning Manual, (IH2), V2.6, 10/2008 Edition, 6SL3097-2AA00-0BP3
CANopen interface