Submaster Screen - Toshiba LICSTAR-IV SE Instruction Manual

SUBMASTER Screen

2) Switching between functions
Each time the SHIFT button is pressed on the SETTING panel, F1 to F10 switches to F11 to F20.
(F1 - F10)
F1 2
(F11 - F20)
# #
3) Recording to an SM fader
3.1) Specifying a CH level to the SM fader
• If the level input is not specified, it is assumed to be FL.
3.2) Recording to the SM fader with the INHIBIT or LOCK function enabled
• When recording by pressing the REC/↓ button on the SUBMASTER panel, data is recorded in the
SM of the bank and page with the INHIBIT or LOCK function enabled.
• Data is recorded in the SM of the PRESET page if recording is done on the SETTING panel.
4) Assigning CH(s) to an SM fader
4.1) Assigning CH(s) to the SM fader of the ACTUAL page
* The specified CHs are added to the SM if CHs have already been assigned to the SM.
> CH number(s) @ Level ↑ (THROW) REC/↓ *
* Button on the SUBMASTER panel
Example) Assign CH2 to SM fader 1.
> CH2 THROW REC/↓
* If the level input in the parentheses is not specified, it is assumed to be FL.
4.2) Assigning CH(s) to the SM fader of the PRESET page
> CH number(s) @ Level = SM SM number ↵ ↵
> SM SM number = CH number(s) @ Level ↵ ↵
or
> CH number(s) @ Level ↑ (THROW) SM SM number ↵
Example) Assign CH2 to SM fader 1.
> CH2 = SM1 ↵ ↵
Example) Assign CH1 to CH3 to SM fader 1.
> SM1 = CH1 ~ 3 ↵ ↵
Example) Assign CH2 to SM fader 1.
> CH2 THROW SM1 ↵
3 SMDATA 4 BANK
# #
5 SMACPG 6 SMPSPG
# # SWAP
15-2
7 PAGE 8 9
# SHIFT # DELETE #
CL #
INSERT #