Toshiba LICSTAR-IV SE Instruction Manual page 221

GRAPHIC PANEL
4. Presetting the Mixing Wheel
The following operations are possible when the MIX LED in the PART/MIX button is lit to indicate
that the mixing mode is in operation.
Commands are entered on the SETTING panel.
1) Assigning CH(s) to the mixing wheel
(Examples of presetting on the LIVE, STAGE, and BLIND screens)
1.1) Assignment in arithmetical mode
* When the @ or % button is omitted, assignment is performed in the arithmetical mode.
> CH number
or
> CH number
Example) Assign CH2 to MIXING1 in the arithmetical mode.
@ MIX1 ↵
> CH2
or
> CH2 @ MANU/
1.2) Assignment in geometrical mode
> CH number
or
> CH number
Example) Assign CH2 to MIXING1 in the geometrical mode.
% MIX1 ↵
> CH2
or
> CH2 % MANU/
@ MIX MIXING number ↵
@ MANU/
↑
Mixing wheel button
% MIX MIXING number ↵
% MANU/
40-5