Table of Contents
Advertisement
SUBMASTER PANEL
5)
Playback operation with the TOUCH switch
Operating procedure
(1)
Press the + or - button beside the TOUCH switch to set the TOUCH switch mode
(+ or - ).
(2)
Press the TOUCH switch.
[TOUCH switch modes]
+ mode : The submaster fader enters the same status as 100% status only while the TOUCH switch
is being pressed.
- mode
: The submaster fader enters the same status as 100% status only while the TOUCH switch
is being pressed. The level values of the other submasters and the other channel outputs
are 0%.
[TOUCH switch LED status]
ON
: A TOUCH switch mode (+ or -) has been selected and the TOUCH switch has been
pressed.
OFF
: No TOUCH switch mode (+ or -) is selected or the TOUCH switch is not being pressed.
Notes
• The TOUCH switch for the submaster fader set to INHIBIT is disabled.
4-17
Advertisement
Table of Contents
