Table of Contents
Advertisement
Switching between Displays
Switching between Displays
1.
Overview
This section presents information about how to change the contents of each display.
These operations should be performed on the SETTING panel.
2.
Operation
1)
Types of displays on the DIMMING CONTROL CONSOLE
#1
PLAYBACK
2)
SET2 button function
This button allows the continuation page on the SETTING display to be displayed on the SETUP
display.
(1) Pressing the SET2 button while its LED is on disables the function.
(2) Pressing the SET2 button while its LED is off enables the function.
[SET2 button LED status]
ON : Enabled
OFF : Disabled
3)
PB button function
This button displays the PLAYBACK screen on the SETUP display.
(1) Pressing the PB button while its LED is on, disables the function.
(2) Pressing the PB button while its LED is off enables the function.
[PB button LED status]
ON : Enabled
OFF : Disabled
#2
SETTING
8-1
#3
SETUP
(Laptop PC)
Advertisement
Table of Contents
