Table of Contents
Advertisement
EFFECT Screen
2)
Setting the master
*1. The EFFECT called onto the screen becomes the master.
*2. Set the master and then record the EFFECT on screen.
> F11 (MASTERI ↵
Example) Set the master.
> MASTER EF ↵
"M" is displayed on the screen.
3)
Setting a slave
* The EFFECT called onto the screen becomes a slave.
*2. Set a slave and then record the EFFECT on screen.
> F11 (MASTER) Master EFFECT number ↵
Example) Set EFFECT10 as a slave.
> MASTER EF 10 ↵
"S10" is displayed on the screen.
4)
Resetting the master-slave association
*1. Reset the master-slave association of the EFFECTs called onto the screen.
*2. Reset the master-slave association and then record the EFFECTs on screen.
> F11 (MASTER) RESET ↵
Example) Reset the master-slave association.
> MASTER EF RESET ↵
5)
Procedure for setting the master and a slave
Example) Set EFFECT1 as the master and set EFFECT2 as a slave.
> EFFECT1 ↓
> MASTER EF ↵
> EFFECT1 ↵ ↵
> EFFECT2 ↓
> MASTER EF 1 ↵
> EFFECT2 ↵ ↵
Call EFFECT1 onto the screen.
Set EFFECT1 as the master.
Record EFFECT1.
Call EFFECT2 onto the screen.
Set EFFECT2 as a slave of EFFECT1.
Record EFFECT2.
17-13
Advertisement
Table of Contents
