Table of Contents
Advertisement
TROUBLESHOOTING
2)
The screen is displayed but the display does not update
* Refer to 1.2) of 4.
5.
Problems with the Notebook PC
1)
The SETUP software cannot be started or operated
(1) Check to see whether the CONSOLE power is turned ON.
(2) Check to see whether the Ethernet cable is connected properly to the notebook PC.
(3) Check to see whether the Ethernet cable of the notebook PC is connected properly to the HUB in
the CPU CABINET.
Also check the lighting status of the LEDs on the HUB, in accordance with
2.
If the lighting status of any LED is not normal, change the relevant connector.
2)
The notebook PC cannot be properly started
(1) When SETUP mode is used, another studio's notebook PC can be used.
(2) If the OS cannot be started properly due to hard disk failure, etc., set up the notebook PC in
accordance with the Notebook PC Setup Procedure.
3)
Problems with removable media
3.1) Data cannot be saved to removable media
(1) Check to see whether the removable media is connected (set) properly.
(2) Check to see whether the removable media is write-protected.
(3) Check to see whether the removable media has enough free space.
If not, increase free space by deleting unnecessary data.
(4) Media with security function cannot possibly save data.
In this case, first save the data to the HDD and then copy it to the media using Windows
Explorer.
3.2) If data cannot be loaded from removable media
(1) Check to see whether the removable media is connected (set) properly.
(2) Check to see whether the HOLD (MEMORY) LED on the CONTROL PANEL is lit.
(3) Check to see whether data for another studio is selected.
Data for another studio cannot be loaded.
46-3
Checking Procedure
Advertisement
Table of Contents
