Table of Contents
Advertisement
SUBMASTER PANEL
6)
Changing submaster functions from PILEON function to INHIBIT
Operating procedure
(1) Press the INH. button.
The INH. button lights up.
(2)
Press the REC/
from PILEON to INHIBIT.
Pressing the REC
Pressing the REC/
and performs the function change.
If the function does not need to be changed, press the CANCEL button.
Pressing the INH. button again while it is lit makes the INH. button go out and
cancels the function change request.
[What is INHIBIT?]
This function puts the channel that has already been assigned under master control.
It also puts the lights of the CUE, EFFECT, and PILEON function submasters under master control.
[INT. button LED display status]
ON: Functions INHIBIT·PILEON can be switched over.
[EDIT button LED display status]
ON (orange)
OFF (orange)
FLASH (orange) : Correction is in progress.
ON (green)
OFF (green)
Notes
• The submaster carrying out the INHIBIT function remains unchanged even if bank switching, actual
page switching, or SEQ assignment is performed.
• A frozen submaster cannot be changed.
button twice above the submaster fader to be switched
button once makes the REC/
button again makes the REC/
: The INHIBIT function is active.
: The PILEON function is active.
: The LOCK function is active.
: The LOCK function is inactive.
button flash.
button and INH. button go out
4-5
Advertisement
Table of Contents
