Toshiba LICSTAR-IV SE Instruction Manual page 21

LIGHTING SYSTEM OPERATION PANEL
4) Enable/disable EXTERNAL CONSOLE input
Press the ON/LINK (EXT.CONSOLE) button to enable or disable input.
(ON/LINK (EXT.CONSOLE) button LED status)
ON(EXT.CONSOLE)
ON(EXT.CONSOLE)
LINK(EXT.CONSOLE)
LINK(EXT.CONSOLE)
LINK(EXT.CONSOLE)
<Function for maintaining lighting levels when external consoles are connected>
* When the light level is maintained at the LIGHTING CONTROL CONSOLE, the [LINK] button flashes.
When you press the flashing button, the light being maintained switches off.
* When the power is turned off with all the external console outputs set to 0%, the dimming signal is not
maintained and the [LINK] button does not flash.
When the LIGHT CONTROL CONSOLE is disconnected from the external console (moving console),
the lighting level received immediately before disconnection is maintained. The lighting and orientation
of the equipment controlled from the external console are maintained.
ON : Inputs from external consoles are enabled
OFF : Inputs from external consoles are disabled.
ON : DMX input signals from external consoles are being received.
OFF : DMX input signals from external consoles are not being received.
FLASH : DMX input signals from external consoles are being maintained.
2-2