Toshiba LICSTAR-IV SE Instruction Manual page 241

Lighting control console
Table of Contents

Advertisement

TROUBLESHOOTING
2)
Only the CONSOLE cannot be operated
2.1) If only a particular switch or fader cannot be operated, the part in question may be defective.
2.2) If the entire CONSOLE, including switches and faders, cannot be operated, an error
condition may have occurred in the CONSOLE PANEL CPU.
* In this case, "CONSOLE PANEL COMMUNICATION ERROR" is displayed on the ALARM screen.
(1) Check to see whether the Ethernet cable is connected properly to "OPERATION" on the rear
panel of the CONSOLE.
(2) Check to see whether the Ethernet cable of the CONSOLE PANEL CPU is connected properly to
the HUB in the CPU CABINET.
Also check the lighting status of the LEDs on the HUB, in accordance with
2.
If the lighting status of any LED is not normal, change the relevant connector.
(3) Check the lighting status of the "OPERATION" LED on the rear panel of the CONSOLE, in
accordance with
If the lighting status of the LED is not normal, carry out
4.
Problems with Playback and Settings
1)
The screen is not displayed
1.1) An error condition may have occurred in the display.
(1) Check the power cable, power switch, and VGA cable for the display.
If any cable is disconnected, reconnect it.
If the power switch is turned OFF, turn it ON.
1.2) An error condition may have occurred in the PLAYBACK CPU or SETTING CPU.
* In this case, "PLAYBACK SCREEN COMMUNICATION ERROR" or "SETTING SCREEN
COMMUNICATION ERROR" is displayed on the ALARM screen.
(1) Check to see whether the Ethernet cable is connected properly to "PLAYBACK" or "SETTING" on
the rear panel of the CONSOLE.
(2) Check to see whether the Ethernet cable of the PLAYBACK CPU or SETTING CPU is connected
properly to the HUB in the CPU CABINET.
Also check the lighting status of the LEDs on the HUB, in accordance with
2.
If the lighting status of any LED is not normal, change the relevant connector.
(3) If the problem is not solved, carry out
Checking Procedure
4.
Recovery Procedure
Recovery Procedure
A.
46-2
Checking Procedure
A.
Checking Procedure

Advertisement

Table of Contents
loading

Table of Contents