Stage Screen - Toshiba LICSTAR-IV SE Instruction Manual

STAGE Screen

STAGE Screen
1. Overview
This screen displays the CH level at the end of the ACTUAL CUE fading and allows editing whilst
outputting the actual lighting output.
The operating procedures are the same as for the BLIND screen.
Controlling a CH level during fading causes the fading to change to the level on the screen since the
target value is controlled.
2. Description of how to operate the STAGE screen
1) Displaying the screen
Press the STAGE button on the SETTING panel, and the screen shown below is displayed.
While an ACTUAL CUE is executed, the message "ACTUAL CUE IN PROGRESS" is displayed in an
area near the bottom of the screen.
This message is displayed only on the STAGE screen.
13-1