Table of Contents
Advertisement
DEFAULT Screen
3)
Setting the fade time to be recorded automatically when a CUE is recorded with no fade time
specified
Step 1)
Press the ↑ or ↓ button to display FADE TIME (MANU, 0 ~ 59 m 59.9) in reverse video.
The same effect is obtained by left-clicking on the words.
Step 2)
Enter the fade time.
Use the F2 (min.) button to specify the minutes, and the . button to enter a decimal point.
> Time ↵ ↵
For manual setting
> F1 (MANU) ↵ ↵
Example) Enter 1 minute and 10.5 seconds.
> 1 m 10.5 ↵ ↵
Example)
> MANU ↵ ↵
4)
Setting the delay time to be recorded automatically when a CUE is recorded with no delay time
specified
Step 1)
Press the ↑ or ↓ button to display the character string DELAY TIME (MANU, 0 ~ 59 m 59.9)
in reverse video.
The same effect is obtained by left-clicking on the words.
Step 2)
Enter the delay time.
Use the F2 (min.) button to specify the minutes, and the . button to enter a decimal point.
> Time ↵ ↵
Example)
> 1 ↵ ↵
5)
Setting the wait time to be recorded automatically when a CUE is recorded with no wait time
specified
Step 1)
Press the ↑ or ↓ button to display the character string WAIT TIME (MANU, 0 ~ 59 m 59.9)
in reverse video.
The same effect is obtained by left-clicking on the words.
Step 2)
Enter the wait time.
When not specifying a wait time, press the F1 (MANU) button.
Use the F2 (min.) button to specify minutes, and the . button to enter a decimal point.
> Time ↵ ↵
Example)
> MANU ↵ ↵
Select the MANU mode.
Enter 1 second.
Specify no wait time.
33-2
Advertisement
Table of Contents
