Table of Contents
Advertisement
BLIND Screen
16.2)
Changing the levels geometrically
> GROUP
GROUP number
> GROUP
GROUP number
> GROUP
GROUP number
> GROUP
GROUP number
Example) Lower the levels of the CHs assigned to GROUP1 by 10% geometrically.
> GROUP
17) Raising or lowering the levels of CHs in groups by the SETTING level wheel
17.1)
Changing the levels linearly
Rotate the level wheel upward to raise the level of the specified CHs on the screen.
Rotate the level wheel downward to lower the level of the specified CHs on the screen.
Example) Lower the levels of the CHs assigned to GROUP1 linearly with the level wheel.
> GROUP
17.2)
Changing the levels geometrically
Rotate the level wheel upward to raise the level of the specified CHs on the screen.
Rotate the level wheel downward to lower the level of the specified CHs on the screen.
Example) Lower the levels of the CHs assigned to GROUP1 geometrically with the level wheel.
> GROUP
18) Specifying a CH and a GROUP at the same time
> GROUP
GROUP number
or
> CH number
Example) Set the level of CH1 and those of the CHs assigned to GROUP3 to 25%.
> GROUP
or
> 1
+
GROUP
%
+10
%
-10
%
+1
%
-1
1
% -10
↑
The COMMAND line on the screen displays the level at the time after %.
1
@ Level wheel
↑
The COMMAND line on the screen displays the levels at the time after @.
1
% Level wheel
↑
The COMMAND line on the screen displays the level at the time after %.
GP → CH
+
+
GROUP
GROUP number
3
+
GP→CH
1
3
@
2
5
Raise the levels of the CHs specified on the screen by 10%.
Lower the levels of the CHs specified on the screen by 10%.
Raise the levels of the CHs specified on the screen by 1%.
Lower the levels of the CHs specified on the screen by 1%.
CH number
@
Level
@
2
5
11-11
@
Level
Advertisement
Table of Contents
