Table of Contents
Advertisement
TRACK SHEET Screen
3.
How to Operate the TRACK SHEET Screen
1)
Call the CUE to change onto the screen. When the specified CUE is available, it is displayed on
the screen
(1) Call an arbitrary CUE.
> CUE CUE number
Example) Call CUE4 onto the screen.
> CUE4
(2) Call the CUE after the currently selected one.
> F1 (F)
(3) Call the CUE before the currently selected one.
> F2 (R)
2)
Change the level of a CH
> CH number @ Level
or
> CH number @ Level wheel
Example 1) Set the level of CH1 to 100%.
> 1 @FL
Example 2) Set the level of CH1 to 80%.
> 1 @ 8 0
Example 3) Adjust the level of CH1 with the level wheel.
> 1 @ Level wheel
3)
Record a CUE
(1) Overwrite-record the selected CUE with CUE ONLY
> ↵ ↵
(2) Overwrite-record the selected CUE with TRACKING
> TRACKING ↵ ↵
(3) Record the selected CUE with a different number by CUE ONLY
* If the specified CUE has already been recorded, press ↵ again after the message to that effect
has been displayed.
> CUE CUE number ↵
Example) Record the selected CUE as CUE4.5.
> CUE4 ↵
(4) Record the selected CUE with a different number with TRACKING
* If the specified CUE has already been recorded, press ↵ again after the message to that effect.
> CUE CUE number TRACKING ↵
Example) Record the selected CUE as CUE4.5.
> CUE4 TRACKING ↵
14-2
Advertisement
Table of Contents
