Effect Panel - Toshiba LICSTAR-IV SE Instruction Manual

EFFECT PANEL

EFFECT PANEL
1. Overview
Effects are assigned to cues or submasters for playback.
Effects can be played in isolation on the EFFECT PANEL to confirm playback.
2. Operating Procedures
1) Playing or stopping an effect
Operating procedure
(1) Select a PATTERN number.
Press the PATT button.
1)
The PATT button lights up.
2) Press the
(2) Press the GO/STOP button for playback.
The STEP number now being played is displayed on the STEP number indicator.
(3) Operating the effect master fader.
Puts the pattern now being played on the EFFECT PANEL under master
control.
(4) Press the GO/STOP button to stop the STEP.
The STEP number where playback was stopped is displayed on the STEP number
indicator.
[PATTERN number indicator]
Displays the PATTERN number now being operated on the EFFECT PANEL.
The number 100 is displayed as 00.
Nothing is displayed when the LIGHTING CONTROL CONSOLE is turned ON.
[STEP number indicator]
Displays the STEP number of the pattern now being operated on the EFFECT PANEL.
The number 100 is displayed as 00.
Nothing is displayed when the LIGHTING CONTROL CONSOLE is turned ON.
[GO/STOP button LED display status]
GO LED is ON: The pattern displayed on the PATTERN indicator is being played.
STOP LED is ON: The pattern displayed on the PATTERN indicator has stopped.
[SPEED LED status]
Blinks according to the playback speed while a pattern is being played.
or button to select a PATTERN number.
5-1