Table of Contents
Advertisement
TROUBLESHOOTING
Other problems
Problem
Actual light is not output
A CUE, SM, or EFFECT cannot be
recorded
Dimming cannot be controlled
with the SM fader
There is a problem with dimming
control using the SM fader
Dimming cannot be controlled
using the SM touch switch
Dimming cannot be controlled
with the
, STOP, and
on the WORKING LIGHT PANEL.
Items to check
Has the GM fader been lowered? Raise the GM fader.
Has the INHIBIT fader of the
submaster been lowered?
Is a channel patched to the load? Patch a channel to the load.
Other
Is the HOLD (MEMORY) button
on the CONTROL PANEL lit?
Is the ON (WIRELESS) button
on the CONTROL PANEL lit?
Is the REC LED above the SM
fader unlit?
Is the CROSS button on the
SUBMASTER PANEL lit?
Is the + or - button on the
SUBMASTER PANEL unlit?
Has the UPPER LIMIT fader of
the WORKING LIGHT PANEL
buttons
been lowered?
Is a load patched to the
WORKING LIGHT?
Solution
Raise the INHIBIT fader.
Refer to the troubleshooting
procedures for the dimmer
cabinet.
Press the HOLD (MEMORY)
button to enable recording.
Press the ON (WIRELESS)
button to give operation rights to
the CONSOLE.
No data is recorded in the SM
fader. Record data in the SM
fader.
Press the CROSS button to
enter normal playback mode.
Press the + or - button.
Raise the UPPER LIMIT fader.
Patch a load.
46-4
Advertisement
Table of Contents
