Cycle994 Measuring Cycle Parameters - Siemens SINUMERIK 840D sl Programming Manual

3.1.3

CYCLE994 measuring cycle parameters

PROC CYCLE994(INT S_MVAR,INT S_KNUM,INT S_KNUM1,INT S_PRNUM,REAL S_SETV,INT S_MA,REAL
S_SZA,REAL S_SZO,REAL S_FA,REAL S_TSA,INT S_NMSP,STRING[32] S_TNAME,INT S_DLNUM,REAL
S_TZL,REAL S_TDIF,REAL S_TUL,REAL S_TLL,REAL S_TMV,INT S_K,INT S_EVNUM,INT S_MCBIT,INT
_DMODE,INT _AMODE) SAVE DISPLOF
Table 3- 3 CYCLE994 call parameters
No. Screen form Cycle
parameters parameters
1 S_MVAR
S_KNUM
2 Selection
Measuring cycles
Programming Manual, 02/2011, 6FC5398-4BP40-0BA0
1)
Meaning
Measuring version
Values: UNITS: Inside or outside measurement (default = 1)
1 = Inside measurement
2 = Outside measurement
TENS: Reserved
HUNDREDS: Correction target
0 = Only measurement (no correction of the WO or no tool offset)
1 = Measurement and determination and correction of the WO (see
3)
2 = Measurement and tool offset (see
THOUSANDS: Protection zone
0 = No consideration of a protection zone
1 = Consideration of a protection zone. Traverse axis, 1st axis of the plane
(for G18 Z). Measuring axis, see
2 = Consideration of a protection zone. Traverse axis, 2nd axis of the plane
(for G18 X). Measuring axis, see
3 = Consideration of a protection zone. Traverse axis, 3rd axis of the plane
(for G18 Y). Measuring axis, see
Correction of the work offset (WO) or basic WO or basic reference
Values: UNITS:
TENS:
0 = No correction
1 to max. 99 numbers of the work offset or
1 to max. 16 numbers of the basic offset
HUNDREDS: Reserved
THOUSANDS: Correction of WO or basic or basic reference
0 = Correction of the adjustable WO
1 = Correction of the channel-specific basic WO
2 = Correction of the basic reference
3 = Correction of the global basic WO
9 = Correction of the active WO or for G500 in last active channel-specific
basic WO
TEN THOUSANDS: Coarse or fine correction in the WO, basic WO or basic
reference
0 = Fine correction
1 = Coarse correction
3.1 Overview of measuring cycle parameters
S_KNUM1
.
S_MA
.
S_MA
.
8)
S_MA
6)
Parameter lists
S_KNUM
)
2)
)
221