Siemens SINUMERIK 840D sl Programming Manual page 242

Parameter lists
3.1 Overview of measuring cycle parameters
No. Screen form Cycle
parameters parameters
S_KNUM
2 Selection
3 Icon+ S_PRNUM
number
4 S_SETV
S_FA
5 DFA
6 TSA S_TSA
7 Alpha 0 S_STA1
8 Alpha 1 S_INCA
S_SETV0
9 X1
10 Y1 S_SETV1
11 Z1 S_SETV2
12 X2 S_SETV3
13 Y2 S_SETV4
14 Z2 S_SETV5
S_SETV6
15 X3
S_SETV7
16 Y3
17 Z3 S_SETV8
18 TNVL S_TNVL
242
Meaning
Correction in work offset (WO) or basic or basic reference
Values: UNITS:
TENS:
0 = No correction
1 to max. 99 numbers of the work offset or
1 to max. 16 numbers of the basic offset
HUNDREDS: Reserved
THOUSANDS: Correction in WO or basic WO or basic reference
0 = Correction in the adjustable WO
1 = Correction in the channel-specific basic WO
2 = Correction in the basic reference
3 = Correction in the global basic WO
9 = Correction in the active WO or for G500 in the last active channel-
specific basic WO
TEN THOUSANDS: Coarse or fine correction in the WO or basic WO or
basic reference
0 = Fine correction
1 = Coarse correction
Number of the field of the probe parameter (not probe number)
(value range 1 to 12)
Diameter of the sphere(s)
Measurement path
Safe area
Starting angle for measurement at an angle
Incremental angle for measurement at an angle
Position setpoint of the 1st sphere of the 1st axis of the plane (for G17 X) for 3 sphere
measurement
Position setpoint of the 1st sphere of the 2nd axis of the plane (for G17 Y) for 3 sphere
measurement
Position setpoint of the 1st sphere of the 3rd axis of the plane (for G17 Z) for 3 sphere
measurement
Position setpoint of the 2nd sphere of the 1st axis of the plane for 3 sphere
measurement
Position setpoint of the 2nd sphere of the 2nd axis of the plane for 3 sphere
measurement
Position setpoint of the 2nd sphere of the 3rd axis of the plane for 3 sphere
measurement
Position setpoint of the 3rd sphere of the 1st axis of the plane for 3 sphere
measurement
Position setpoint of the 3rd sphere of the 2nd axis of the plane for 3 sphere
measurement
Position setpoint of the 3rd sphere of the 3rd axis of the plane for 3 sphere
measurement
Limit value for distortion of the triangle (sum of the deviations) for 3 sphere
measurement
5)
7)
6)
4)
Programming Manual, 02/2011, 6FC5398-4BP40-0BA0
3)
Measuring cycles