Measuring Result Screens; Measuring Variants - Siemens SINUMERIK 840D sl Programming Manual

1.13.2

Measuring result screens

Function
Measurement result displays can be shown automatically during a measuring cycle. In the
channel-specific SD 55613 $SCS_MEA_RESULT_DISPLAY, you can select between the
following measurement result screens:
= 0
= 1
= 3
= 4
The measuring cycles can display different measuring result screens depending on the
measuring variant:
● Calibrating tool probes
● Tool measurement
● Calibrating workpiece probes
● Workpiece measurement
Displaying measuring results screens
The measuring results screens contain the following data:
Calibrating tool probes
● Measuring cycle and measuring version
● Trigger values of axis directions and differences
● Probe number
● Safe area
Tool measurement
● Measuring cycle and measuring version
● Actual values and differences for tool offsets
● Safe area and permissible dimensional difference
● T name, D number
Measuring cycles
Programming Manual, 02/2011, 6FC5398-4BP40-0BA0
The measurement results screen is not displayed (default setting)
The measurement results screen is displayed for 8 seconds.
The measuring cycle stops at the NC command "M0", the measuring results screen is
statically displayed.
The measuring cycle is continued with NC Start, the measuring results screen is
deselected.
The measuring results screen is only displayed for cycle alarms 61303, 61304, 61305
and 61306.
The measuring cycle is continued with NC Start, the measuring results screen is
deselected.
Description
1.13 Miscellaneous functions
47