Changes In The Machine And Setting Data From Sw 4.4 - Siemens SINUMERIK 840D sl Programming Manual

Changes from cycle version SW4.4 and higher
A.2 Changes in the machine and setting data from SW 4.4
A.2

Changes in the machine and setting data from SW 4.4

MD replaced with SD
The following cycle machine data (measuring in JOG) no longer apply from cycle release
SW 04.04.01 (compared to SW 02.06.00 ) and are replaced by the following cycle setting
data that mean the same .
MDs are no longer required
51609 $MNS_MEA_INPUT_TOOL_PROBE_SUB[0 .. 5]
51755 $MNS_J_MEA_MEASURING_FEED
51774 $MNS_J_MEA_T_PROBE_TYPE[n]
51776 $MNS_J_MEA_T_PROBE_ALLOW_AX_DIR[n]
51778 $MNS_J_MEA_T_PROBE_DIAM_LENGTH[n]
51782 $MNS_J_MEA_T_PROBE_T_EDGE_DIST[n]
51787 $MNS_J_MEA_T_PROBE_MEASURE_FEED
SD replaced by SD
The following cycle setting data (measuring in JOG) no longer apply from cycle release SW
04.04.01 (compared to SW 02.06.00 ) and are replaced by the following cycle setting data
that mean the same .
SD are no longer required
55761 $SCS_J_MEA_SET_NUM_OF_ATTEMPTS
55762 $SCS_J_MEA_SET_RETRAC_MODE
55763 $SCS_J_MEA_SET_FEED_MODE
55770 $SCS_J_MEA_SET_COUPL_SP_COORD
55771 $SCS_J_MEA_SET_CAL_MODE
55772 $SCS_J_MEA_SET_PROBE_MONO
Change, number of the setting data
For the following cycle setting data, from SW 04.04.01, the number of the setting data
changes (with respect to cycle release SW 02.06.00). Identifier and function have not
changed.
Release SW 02.06.00 From SW 04.04.01
54798
54799
55630
55631
55632
55633
260
Replaced by SD
54652 $SNS_MEA_INPUT_TOOL_PROBE_SUB[0 .. 5]
55630 $SCS_MEA_FEED_MEASURE
54633 $SNS_MEA_TP_TYPE[n]
54632 $SNS_MEA_TP_AX_DIR_AUTO_CAL[n]
54631 $SNS_MEA_TP_EDGE_DISK_SIZE[n]
54634 $SNS_MEA_TP_CAL_MEASURE_DEPTH[n]
55628 $SCS_MEA_TP_FEED_MEASURE
Replaced by SD (observe the appropriate bit)
55740 $SCS_MEA_FUNCTION_MASK Bit 17
55740 $SCS_MEA_FUNCTION_MASK Bit 5
55740 $SCS_MEA_FUNCTION_MASK Bit 4
55740 $SCS_MEA_FUNCTION_MASK Bit 14
55740 $SCS_MEA_FUNCTION_MASK Bit 15
The mono probe function is assigned to the tool, tool type 712
Number SD
54780
54782
55632
55634
55636
55638
Identifier
$SNS_J_MEA_FUNCTION_MASK_PIECE
$SNS_J_MEA_FUNCTION_MASK_TOOL
$SCS_MEA_FEED_RAPID_IN_PERCENT
$SCS_MEA_FEED_PLANE_VALUE
$SCS_MEA_FEED_FEEDAX_VALUE
$SCS_MEA_FEED_FAST_MEASURE
Programming Manual, 02/2011, 6FC5398-4BP40-0BA0
Measuring cycles