Siemens SINUMERIK 840D sl Programming Manual page 230

Parameter lists
3.1 Overview of measuring cycle parameters
No. Screen form Cycle
parameters parameters
S_RA
3
A, B, C
S_PRNUM
4 Icon+
number
S_SETV
5 DX / DY /
DZ
6 α S_STA1
7 β S_INCA
8 DFA S_FA
S_TSA
9 TSA
10 X / Y / Z S_MA
S_MD
11 +-
S_ID
12 L2
13 L2 S_SETV0
14 S_SETV1
S_SETV2
15 L3x
16 L3y S_SETV3
17 Measureme S_NMSP
nts
18 S_MCBIT
230
Meaning
Correction target coordinate rotation or rotary axis
Values: 0 = Correction target coordinate rotation around the axis that results from
parameter
S_MA
>0 = Correction target rotary axis. Number of the channel axis number of the
rotary axis (preferably rotary table). The angle offset is made in the
translatory part of the WO of the rotary axis.
Number of the field of the probe parameter
(default=1)
Distance (incremental) from the starting position to measuring point P1 of the measuring
axis ( )
5)
S_MA
Angle setpoint for "Align edge" or for "Align plane" around the 1st axis of the plane (for
G17 X)
9)
Angle setpoint for "Align plane" around the 2nd axis of the plane (for G17 Y)
Measurement path
Safe area
Monitoring of the angle difference to the angle setpoint [degrees]
Measuring axis, offset axis
Values: UNITS: Number of the measuring axis
1 = 1st axis of the plane (for G17 X)
2 = 2nd axis of the plane (for G17 Y)
3 = 3rd axis of the plane (for G17 Z)
TENS: Reserved
HUNDREDS: Number of the offset axis
1 = 1st axis of the plane (for G17 X)
2 = 2nd axis of the plane (for G17 Y)
3 = 3rd axis of the plane (for G17 Z)
Measuring direction of the measuring axis
Values: 0 = Measuring direction is determined from the setpoint and the actual
position of the measuring axis (compatibility)
1 = Positive measuring direction
2 = Negative measuring direction
For measuring version "Align edge":
Distance (incremental) between the measuring points P1 and P2 in the offset axis (value
>0)
For measuring version "Align plane", the parameters listed below apply.
Distance between the measuring points P1 and P2 in the 1st axis of the plane
Distance between the measuring points P1 and P2 in the 2nd axis of the plane
Distance between the measuring points P1 and P3 in the 1st axis of the plane
Distance between the measuring points P1 and P3 in the 2nd axis of the plane
Number of measurements at the same location
Reserved
4)
(default=201)
7)
8)
(default=1)
2)
Programming Manual, 02/2011, 6FC5398-4BP40-0BA0
9)
6)
10)
11), 12)
11)
10)
Measuring cycles