Siemens SINUMERIK 840D sl Programming Manual page 82

Measuring variants
2.2 Measure workpiece (turning)
S_MA, multi-digit = 302
3rd Axis is the bypass axis (Y)
2nd axis of the plane, is the measuring axis (X)
Probe with SL=7
S_MA, multi-digit = 301
3rd Axis is the bypass axis (Y)
1st axis of the plane, is the measuring axis (Z)
Probe with SL=8
82
S_MA, multi-digit = 203
2nd Axis of the plane is the bypass axis (X)
3rd axis is the measuring axis (Y)
Probe with SL=7
Programming Manual, 02/2011, 6FC5398-4BP40-0BA0
Measuring cycles